Marantz PM-11S2 Bedienungsanleitung PDF herunterladen (Seite 29)

NAMES AND FUNCTIONSBASIC CONNECTIONSBASIC OPERATIONS

ADVANCED CONNECTIONS

ADVANCED OPERATIONSTROUBLESHOOTINGOTHERS ADVANCED OPERATIONS

ENGLISH

ADVANCED OPERATIONS

7 How to Trim Bass

The bass level of the left and right channels can be trimmed

in 2dB steps across a –8.0 – +8.0dB range. When this unit is

shipped from the factory, the bass level is set to 0 dB. To trim

the bass level, active tone control by pressing the TONE button

on either the unit or the remote controller.

1. Press the TRIM button once to access the LEVEL trimming

mode.

2. Press the ENTER button once to access the BASS trimming

mode.

3. The flashing “0” on the left indicates that trimming is

activated for the left channel bass level. Press the 3 and

4 buttons to set the bass level of the left channel.

4. Press the 2 button to start the “0” on the right side flashing.

When the right side “0” starts flashing, trimming is activated

for the right channel bass level. Press the 3 and 4 buttons

to set the bass level of the right channel.

5. To trim the bass level of the ID 2 (slave) unit, press the

TRIM button again and set the bass level as in steps 2-4.

After that, pressing the TRIM button again allows you to

trim the bass level for the “ID 3” unit and so forth.

6. When finished with bass level trimming, press the EXIT

button.

7 How to Trim Treble

The treble level of the left and right channels can be trimmed

in 2dB steps across a –8.0 – +8.0dB range. When this unit is

shipped from the factory, the bass level is set to 0 dB. To trim

the treble level, active tone control by pressing the TONE button

on either the unit or the remote controller.

1. Press the TRIM button once to access the LEVEL trimming

mode.

2. Press the ENTER button twice to access the TREBLE

trimming mode.

3. The flashing “0” on the left indicates that trimming is

activated for the left channel treble level. Press the 3 and

4 buttons to set the treble level of the left channel.

4. Press the 2 button to start the “0” on the right side flashing.

When the right side “0” starts flashing, trimming is activated

for the right channel treble level. Press the 3 and 4 buttons

to set the treble level of the right channel.

5. To trim the treble level of the ID 2 (slave) unit, press the

TRIM button again and set the treble level as in steps 2-4.

After that, pressing the TRIM button again allows you to

trim the treble level for the “ID 3” unit and so forth.

6. When finished with treble level trimming, press the EXIT

button.

PM-11S2_UN_01_Eng.indd 23PM-11S2_UN_01_Eng.indd 23 08.8.7 6:42:22 PM08.8.7 6:42:22 PM

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35

Kommentare zu diesen Handbüchern

Keine Kommentare

Marantz PM-11S2 Bedienungsanleitung Seite 29

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Empfänger und Verstärker Marantz PM-11S2