Marantz SR4001 Bedienungsanleitung PDF herunterladen (Seite 39)

ENGLISH

OTHER FUNCTION

TV AUTO ON/OFF FUNCTION

This function allows the component connected to the

TV-VIDEO in jack to control the power (ON/OFF) to

the SR4001/SR5001.

AUTO POWER ON

Be sure the TV auto mode is ENABLED. (Refer

page 27 : System Setup)

Connect your TV TUNER (etc) to the TV-

VIDEO in terminal. Be sure to connect the

VIDEO input.

Turn OFF the power to the TV TUNER and the

SR4001/SR5001.

Turn ON the TV TUNER and tune in a receivable

station.

When the station is received, the SR4001/

SR5001 turns ON and TV is selected

automatically.

AUTO POWER OFF

In the above situation, turn the TV TUNER OFF

or select a channel that does not contain any

broadcast.

The power to the SR4001/SR5001 switches to

STANDBY after approx. 5 minutes.

Notes:

• AUTO POWER OFF is canceled if the SR4001/

SR5001 is set to a source other than TV.

The function reactivates when TV is selected again.

• Some TV broadcasts may cause the TV AUTO

FUNCTION to turn ON.

• The S-Video terminal does not support “TV AUTO

ON/OFF” function.

ATTENUATION TO ANALOG INPUT SIGNAL

DISP

DIRECT

PTY

TUNING

PRESET

CDR

DVD VCR

TUNER

DSS

BASS

TREBLE

REC

AUDIO

ANGLE

DISC+

CH-SEL

V-OFF

SUB TITLESUB TITLE

ATT.ATT.

If the selected analog audio input signal is greater

than the capable level of internal processing, the

“PEAK” indicator will light up on the front display. If

this happens, you should press the ATT button on

the remote.

“ATT” indicator will be illuminated when this function

is activated. The signal-input level is reduced by

about half. Attenuation will not work with the output

signal of TAPE-OUT, CD-R/MD-OUT, VCR1-OUT

and DSS/VCR2-OUT.

This function is memorized for each individual input

source.

LISTENING THROUGH HEADPHONES

This jack may be used to listen to the SR4001/

SR5001’s output through a pair of headphones.

Be certain that the headphones have a standard

1/4” stereo phono plug. (Note that the speakers will

automatically be turned off when the headphone jack

is in use.)

MULTI

SPEAKER

SETUP

SIMPLE

MULTI

PURE

SURROUND

STANDBY

PHONES

POWER ON/STANDBY

INPUT SELECTOR

AV SURROUND RECEIVER SR5001

DIRECT

AUTO

HT-EQ

MODE

Note:

The surround mode returns to the previous setting as

soon as the plug is removed from the jack.

DOLBY HEADPHONE MODE

This feature simulates the waveforms of the actual

sounds heard from the speakers.

When headphones are used, the MENU button

automatically switches to the Dolby headphone

mode.

The OSD that appears when the MENU button is

pressed is shown below.

HEAD PHONE

DOLBY HP MODE : ON

SURROUND : OFF

L LEVEL : 0 dB

R LEVEL : 0 dB

DOLDBY HP (Headphone) MODE can be selected

with the left and right cursor buttons.

BYPASS → ON → BYPASS

BYPASS: Bypasses the Dolby headphone mode

and delivers ordinary 2-channel stereo.

ON: Dolby headphone mode active.

When the PURE DIRECT mode is selected, Dolby

surround processing is bypassed and “✽✽✽” is

displayed as the mode indication.

The surround mode can be selected when mode is

ON.

L/R LEVEL can be set in the ±10 dB range.

Notes:

• The surround mode returns to the previous setting as

soon as the plug is removed from the jack.

• TONE cannot be set when mode is ON.

• The Dolby Headphone function will not work when

32 or 96 kHz PCM digital signals are input.

VIDEO ON/OFF

When no video signal is connected to the SR4001/

SR5001 or a DVD, etc., is connected directly to your

TV, the unnecessary video circuit can be turned off

by selecting the “VIDEO OFF” setting.

To select video off, press the AMP button and press

the V-OFF button.

TAPE

REMOTE CONTROLLER

RC5001SR

CDR

DVD

AUX2

VCR

TUNER

DSS

AUX1

AMPAMP

TUNING

PRESET

DVD VCR

DSS

BASS

TREBLE

AUDIO

ANGLE

SUB TITLE

DISC+

CH-SEL

V-OFF

ATT.

SETUP

SIMPLE

PURE

T-MODE

SURROUND

MEMORY

DISPLAY

5001

DIRECT

AUTO

HT-EQ

EXIT

MODE

BAND

CLEAR

ENTER

DISPLAY MODE

P.SCAN

T.MODE

123

456

789

SEND

INPUT

EX/ES

VIRTUAL

dts

P.DIRECT

OFF

SET

STEREO

NIGHT

M-CH ST

AUTO

SURROUND

SLEEP

LEARN

LIP SYNC/

SOURCE

DISPLAYDISPLAY

SETUP

SIMPLE

PURE

T-MODE

SURROUND

MEMORY

DISPLAY

R SR5001

DIRECT

AUTO

HT-EQ

EXIT

MODE

BAND

CLEAR

ENTER

You can select the display mode for the front display

of the SR4001/SR5001.

To select this mode, press the DISPLAY on the

remote control.

When this button is pressed, the display mode is

switched in the following sequence.

→ Surround Mode → Auto-display Off → Display Off

→ Input Function → Surround Mode....

In Auto display off mode, the display is off. But, if you

make a change to the unit such as input or surround

mode, the display will show that change, then go

back to off after about 3 seconds. When changing the

volume, it is not displayed.

In Display off mode, the display is off completely.

Note:

Only the DISP indicator will be illuminated on the

front display in display off condition

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare

Marantz SR4001 Bedienungsanleitung Seite 39

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Empfänger und Verstärker Marantz SR4001