Marantz PS5400 Betriebsanweisung PDF herunterladen (Seite 27)

ENGLISH

OTHER FUNCTION

TV AUTO ON/OFF FUNCTION

This function allows the component connected to

the TV-VIDEO in jack to control the power (ON/

OFF) to the SR5400.

AUTO POWER ON

Be sure the TV auto mode is ENABLED.

(Refer page 18 : System Setup)

Connect your TV TUNER (etc) to the TV-

VIDEO in terminal. Be sure to connect the

VIDEO input.

Turn OFF the power to the TV TUNER and

the SR5400.

Turn ON the TV TUNER and tune in a receivable

station.

When the station is received, the SR5400

turns ON and TV is selected automatically.

AUTO POWER OFF

In the above situation, turn the TV TUNER

OFF or select a channel that does not contain

any broadcast.

The power to the SR5400 switches to STANDBY

after approx. 5 minutes.

Notes:

• AUTO POWER OFF is canceled if the SR5400 is

set to a source other than TV.

The function reactivates when TV is selected

again.

• Some TV broadcasts may cause the TV AUTO

FUNCTION to turn ON.

• The S-Video terminal does not support “TV AUTO

ON/OFF” function.

ATTENUATION TO ANALOG INPUT

SIGNAL

If the selected analog audio input signal is greater

than the capable level of internal processing, the

“PEAK” indicator will light up on the front display.

If this happens, you should press the ATT button

on the front panel or on the remote.

“ATT” indicator will be illuminated when this function

is activated. The signal-input level is reduced by

about half. Attenuation will not work with the output

signal of TAPE-OUT, CD-R/MD-OUT, VCR1-OUT

and DSS/VCR2-OUT.

This function is memorized for each individual

input source.

LISTENING THROUGH HEADPHONES

This jack may be used to listen to the SR5400’s

output through a pair of headphones. Be certain that

the headphones have a standard 1/4" stereo phono

plug. (Note that the speakers will automatically be

turned off when the headphone jack is in use.)

Notes:

• When using headphones, the surround mode will

change to STEREO and TruSurround (TS)

headphones by SURROUND MODE selector.

• The surround mode returns to the previous setting

as soon as the plug is removed from the jack.

VIDEO ON/OFF

When no video signal is connected to the SR5400

or a DVD, etc., is connected directly to your TV, the

unnecessary video circuit can be turned off by

selecting the “VIDEO OFF” setting.

To select video off, press the VIDEO OFF button

on the front panel.

DISPLAY MODE

You can select the display mode for the front display

of the SR5400.

To select this mode, press the DISPLAY on the

remote control.

When this button is pressed, the display mode is

switched in the following sequence.

→ Surround Mode → Auto-display Off → Display

Off → Input Function → Surround Mode....

In Auto display off mode, the display is off. But, if

you make a change to the unit such as input or

surround mode, the display will show that change,

then go back to off after about 3 seconds. When

changing the volume, it is not displayed.

In Display off mode, the display is off completely.

Notes:

• Only the DISP indicator will be illuminated on the

front display, in display off condition

AV SURROUND RECEIVER SR5400

SELECTOR

MEMORY

TUNIN

CLEAR

POWER ON/OFF

PHONES

ENTER

STANDBY

SELECT

DSS/VCR2

AUX

VCR1

DVD

A/D6.1CH INPUTVIDEO OFF

VOLUME

DOWN

MODE

MUTE

AUX INPUT

S-VIDEO VIDEO L AUDIO R

ATT

CD-R

TAPE

TUNER

S-DIRECT DISPLAY

F/P

V SURROUND RECEIVER SR5400

DOWN

MEMORY

TUNING

MODE

CLEAR

MUTE

PHONES

ENTER

S-VIDE

DSS/VCR2

AUX

VCR1

DVD

CD-R

TAPE

TUNER

S-DIRECT DISPLAY

A/D6.1CH INPUTVIDEO OFF

F/P

DISP MULTI AUT O TUNED ST V

–

OFF NIGHT PEAK ANALOG

DIGITAL

ATT

SLEEP

SURR

AUTO

DIRECT DISC 6.1 MTX 6.1 SPKR AB EQ

DIGITAL

SURROUND

PCM

SL S SR

LFE

AV SURROUND RECEIVER SR5400

MEMORY

TUNINGCLEAR

PHONES

ENTER

DSS/VCR2

AUX

VCR1

DVD

CD-R

TAPE

S-DIRECT

A/D6.1CH INPUTVIDEO OFF

F/P

DISP MULTI AUT O TUNED ST V

–

OFF NIGHT PEAK ANALOG

DIGITAL

ATT

SLEEP

SURR

AUTO

DIRECT DISC 6.1 MTX 6.1 SPKR AB EQ

DIGITAL

SURROUND

PCM

SL S SR

LFE

SELECTING ANALOG AUDIO INPUT

OR DIGITAL AUDIO INPUT

If you have already assigned the digital inputs, you

can temporarily select the audio input mode for

each input source with the A/D button on the remote

controller or front panel.

When this button is pressed, the input mode is

switched in the following sequence.

→ Digital Auto → Digital → Analog → Digital Auto....

In Digital Auto mode, the types of signals being

input to the digital and analog input jacks for the

selected input source are detected automatically.

If no digital signal is being input, the analog input

jacks are selected automatically.

In Digital mode, input is fixed to an assigned digital

input terminal.

In analog mode, the analog input jacks are selected.

This selecting is temporary, so the result will not be

stored in memory.

If you need to change the input mode completely,

use SYSTEM SETUP in OSD menu system. (see

page 17)

OUND RECEIVER SR5400

MEMORY

TUNING

MODE

CLEAR

HONES

NTER

DSS/VCR2

AUX

VCR1

DVD

CD-R

TAPE

TUNER

S-DIRECT DISPLAY

A/D6.1CH INPUTVIDEO OFF

F/P

DISC/DECK

PTY

ATT.

F.DIRECT

DISP./RDS

TUNE/SEARCH

MODE

TREBLE

BASS

SYSTEM REMOTE CONTROLLER

RC5400SR

+/A

/VCR

/ANT

–/B

F.DIRECT

DISP./RDS

TUNE/SEARCH

MODE

TREBLE

CHANNEL/SKIP

BASS

A/D

P.SCAN

6.1CH IN

STEREO

M-CH ST

MEMO

CLEAR

DISPLAY

NIGHT

CSII EX/ES DSP

DTS

S-DIRECT

AUTO

321

654

T.TONE

MENU OFF

SETUP/

F.DIRECT

DISP./RDS

TUNE/SEARCH

MODE

TREBLE

CHANNEL/SKIP

BASS

A/D

P.SCAN

6.1CH IN

STEREO

M-CH ST

MEMO

CLEAR

DISPLAY

NIGHT

CSII EX/ES DSP

DTS

S-DIRECT

AUTO

321

654

T.TONE

MENU OFF

SETUP/

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 36 37

Kommentare zu diesen Handbüchern

Keine Kommentare

Marantz PS5400 Betriebsanweisung Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für AV-Receiver Marantz PS5400